Posted by AR15Mold.com on Dec 29th 2015
Ok so what's the deal with this product? Do they fail? How long do the molds last? How much is all this?
The cost for the Freedom15 mold + resin to cast five receivers is: $329.00.
Link to purchase the product: http://ar15mold.com/freedom-15-5-kit/
We love this product and think that you will dig it too.
During our design, durability and strength testing we re-used the same Freedom-15 Mold to cast and re-cast over one hundred lowers.
The majority of our durability testing has consisted of firing thousands and thousands of rounds without a single failure or issue with the Freedom-15 unit. Shortly, we will put together a series of the firing videos.
We also offer Recharge Kits of ARCast Polymer Resin.
A five pour Recharge Kit of ARCast Polymer Resin is $119.00.
If you back out the mold cost, your cost to cast additional 100% complete lower receivers is $23.00.
Remember that NO MACHINING is required on our AR15 receiver.
In less than two hours you can cast your own Freedom-15 lower receiver (1:45 is typical).
We recommend waiting another 12 hours for additional air cure in 70F+ air temps before assembling or hardening the Feedom15 lower receiver.
If you decide to harden the product, set a small toaster oven at 135F and set the unit upright on the mag well and bake for 2 hours.
Hardening is not required.....however it will make the product even stronger.
The Freedom15 has been designed, produced and tested in the USA by gun enthusiasts. We have units in stock, ready to ship.
Even though it may seem like a simple concept, it was a long tough slog to turn this idea into something that we would rely on to protect our own family in a fire-fight.
We could have released this product a few years ago.....our problem is: we did not want to release something that we would not use ourselves.
The base Freedom-15 mold kit includes the mold and enough polymer resin to cast FIVE lower receivers.
The default color of a Freedom-15 cast with our ARCast polymer resin is white. You can add one or several of our special dye's and color to taste.
Here is a link to a strength test video:
Let us know what else we can do for you.
AR15 Freedom15 Torture Test.....we park a 2014 F150 FX4 Supercrew on a bare Freedom15 Lower Receiver.Usually other companies perform this test with a lower parts kit and magazine installed. We went for the bare strength test!Click below on the YouTube link to view the video:https://youtu.be/kdX7hOyqm6k